1、整機全程采用PLC控制設備運轉：操作直觀方便，變頻調速，速度可達32米/分。
1, the whole process of PLC control equipment operation: intuitive and convenient operation, frequency conversion speed, the maximum speed of up to 32 meters / minute.
2、具有W-E玻璃自動識別系統：保證鍍膜中空玻璃，（特別是LOW-E玻璃）膜層面不被破壞，清洗段采用特殊防護，三對毛刷全部采用軟質高溫絲，玻璃輸送段裝有鍍膜玻璃自動識別系統，充分保證鍍膜玻璃正確清洗、正確合片。
2, with W-E glass automatic identification system: guarantee film coated hollow glass, (especially LOW-E glass) film layer is not destroyed, cleaning section with special protection, three to the brush all soft high temperature wire, glass section with coated glass automatic identification system, fully ensure the correct cleaning of coated glass, the correct film closing.

3、中空玻璃設備具有三對毛刷，雙道清洗：采用三刷三淋，保證清洗干凈效果，清洗段全部采用優質不銹鋼，與水接觸部分采用不銹鋼或銅，水箱配有恒溫水加熱裝置，并配有粗、精兩極過濾系統。

3, the hollow glass equipment has three pairs of brushes, double cleaning: using three brush and three drenching to ensure the best cleaning effect. All the cleaning sections are made of high quality stainless steel. Stainless steel or copper is used in contact with water. The water tank is equipped with constant temperature water heating device, and it is equipped with a coarse and fine two pole filter system.
4.節能間斷式自動工作系統：整機采用節能間斷式自動工作系統，當玻璃運行至上料段末端光電傳感器時，毛刷、水泵、風機自動啟動，節能省電。
4. energy saving intermittent automatic working system: the whole machine adopts energy saving and discontinuous automatic working system. When glass running is the first photoelectric sensor at the end of the material section, the brush, water pump and fan automatically start, saving energy and saving electricity.
5.中空玻璃生產具有定位準確，無錯位現象：壓片機內，真空發生器采用進口產品，吸力大，吸盤真空度在0.8bar以上，分區域自動吸合玻璃，充分保證吸住玻璃后不會下滑。
5. hollow glass production has accurate positioning, no dislocation: in the press machine, the vacuum generator adopts the imported famous brand products, the suction force is large, the vacuum degree of the suction cup is above 0.8bar, the partition domain automatically sucks the glass, and it is fully guaranteed that the glass will not fall after the glass is sucked.
6.壓合精度高：采用液壓驅動，運動采用雙向直線導軌，后板面有自動導向定位功能，充分保證兩個板面平行壓合，根據中空玻璃板面的大小，設有調壓功能，保壓時間根據玻璃大小可調整。
6. high precision: using hydraulic drive, motion using bi-directional linear guide, the rear plate surface has automatic orientation function, fully guarantee the two plate parallel compression, according to the size of the hollow glass plate, pressure regulating function, pressure keeping time can be adjusted according to the size of glass.